Are you struggling with an error message that keeps popping up on your HP printer screen? It is common for HP printer users to encounter the dreaded “49.4c02” error. This error can cause your printer to stop functioning, leaving you frustrated and without a solution.
However, fear not, as we have some effective solutions that will get your printer up and running again in no time. But that’s not all. In addition to resolving the “49.4c02” error, we will also address another common printer issue that many users face: “How To Fix Printer Not Scanning To Computer.“
So, if you’re ready to discover how to tackle these issues and get back to printing and scanning with ease, read on. I hope that you’ll like the information that is provided in this specific article.
It is a common issue that can occur in all inkjet and laserjet printing devices, however, it is pretty simple to fix them. You just have to follow the given below steps. In case you want to learn, more about this error, then make sure to read this article till the end for accurate results for your devices.
First, I disconnected the printer from the network to isolate it from other devices.
Then, I turned off the printer and waited for at least five minutes to allow it to cool down.
Next, I turned on the printer while pressing the “Cancel” button to clear any pending print jobs in the queue.
After that, I reconnected the printer to the network and tried to print a test page. If the error persisted, I moved to the next step.
I checked for any firmware updates for my HP printer model and installed them if available. This step is crucial as outdated firmware can cause the 49.4c02 error.
If the error persisted, the IP address of the printer was obtained by printing a configuration page.
Then, I opened a web browser and entered the printer’s IP address to access the printer’s Embedded Web Server (EWS).
In the EWS, I navigated to the “Settings” tab and clicked on “Security.”
Under “Security,” I selected “Administrator Settings” and cleared any invalid jobs from the print queue.
Finally, I saved the changes and restarted the printer.
Result:
You can fix the HP printer error 49.4c02 or the HP 4700 printer error 49.4c02 by following these steps. It is a common HP error code that can occur due to various reasons such as outdated firmware, corrupted data, or a hardware issue. For further assistance, it is recommended that you contact HP support if the error code persists.
Causes & Alternatives of HP Printer Error 49.4c02:
The HP printer error 49.4c02 can be caused by various factors such as outdated firmware, corrupted data, or a hardware issue. Some specific causes of this error code can be a corrupt or invalid print job, a miscommunication between the printer and the computer, or a faulty printer driver.
The error message indicates that the printer has encountered an internal communication error or a firmware crash, causing it to stop working. This error can be frustrating and time-consuming to fix, but following the steps mentioned earlier can help resolve the issue.
However, if these steps do not work, an alternative solution can be to perform a cold reset on the printer.
To do this, turn off the printer, disconnect all cables, and remove any accessories such as extra memory or a hard drive. Hold down the “Go” or “Ready” button while turning the printer on. Once the printer has finished initializing, reattach any accessories and cables and try printing a test page.
If the issue persists, it may be necessary to contact HP support or a professional technician to diagnose and resolve the problem.
The 49.4C02 error, as well as similar errors, is largely caused by a miscommunication between the target printer and the system that sent the print. An outdated firmware version of the printer or certain PDF files could cause this issue.
What is the HP 49.4 c01 error?
This is a firmware error that can only occur when there is a problem with the formatter or a problem with the job that is trying to print.
What is HP 9050 error 49.4 c02?
An error 49.4c02 is being reported by network printers. Occasionally, this issue occurs as a result of an excessive number of jobs in the queue. The queue can be cleared to resolve this issue.
Conclusion:
In conclusion, the HP printer error 49.4c02 can be a frustrating issue for users, but there are effective solutions available to fix it. Following the steps mentioned earlier can help users resolve the issue. Performing regular maintenance and keeping the printer’s firmware up-to-date is essential for preventing this error.
Error codes persisting may indicate hardware problems requiring professional assistance. The issue should be further diagnosed and resolved by HP support or a qualified technician.
A veteran of the printing industry, Mariana Kellyhas been giving expert reviews for years. Her language is clear and concise, but never dull - she often injects anecdotes from his experience to illustrate a point or explain why something matters.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
